| Characteristics of knitting industry of Jiangsu knitting machine |
| Hits：2231 AddTime：2020/10/12 14:23:22 |
| The knitting industry characteristics of Jiangsu braiding machine include: wire and cable knitting machine, rope braiding machine, pipe braiding machine, medical knitting machine, wire harness weaving machine, etc. From the beginning of single knitting to today's various fields, various industries are applied. He also divided into horse type knitting machine, boat type knitting machine, swing bar type knitting machine. Each of them has its own advantages and its own characteristics. We all have him in our lives, and the data line is the wire.
Knitting machine repair is to remove the parts of the mechanical knitting part, sort and clean, and replace the parts that are expected to be damaged before the next major repair, and then install and adjust according to the requirements of minor repair. The time is usually about 24 months after the normal operation of the large circular knitting machine. During major repair, all mechanical parts should be disassembled, thoroughly cleaned, worn parts repaired, and parts beyond service life removed. Then, comprehensive installation and adjustment should be carried out according to the requirements of overhaul. The overhaul is usually carried out after the normal operation of the large circle machine for about 96 months. At the same time, the main goal of key maintenance is to remove the dust and flying flowers from all parts of the machine, clean the knitting machine parts and replace the damaged knitting needles, etc. when the large circular knitting machine with cotton yarn as the main part operates for about 6 months, it is necessary to carry out key maintenance on the knitting parts of the machine. Properly increase the number of turns of cable on the traction wheel, and the speed between the adjusters is stable. The automatic yarn breaking and power-off device of high-speed knitting machine is fast and accurate. When the core is used up or the thread is broken, the high-speed knitting machine will automatically stop running, so in the case of unmanned operation, the machine can be safely operated to increase the output and reduce the cost. Electrical equipment wire and cable the main characteristics of this kind of products are: a variety of specifications. Chemical fiber yarn is the main knitting material, which can be repaired in normal operation for about 12 months. The specific operation is to remove the knitting needle and sinker, clean the needle slot and sinker slot, and then re install it. The yarn guide (yarn feeding nozzle and steel shuttle) is readjusted until the machine is turned on normally, and the fabric quality is guaranteed. It is convenient to check and remove the floating hairs and oil stains in the machine head by using a toothbrush. Brush the floating hair out and try not to let the hair go deep into the inside of the machine head and stick it inside. Usually, we don't spray a large area of nursing sewing machine oil on the inside of the machine head directly, which is a key point of the machine head that will not let the hair stick. Knitting machine function: high quality machine parts, scientific mechanism, make the machine more stable operation, longer service life. Humanized design, safe and easy operation, direct and convenient protection of the machine. When knitting, it is not easy to break the thread and will not wear the surface of the raw material. After weaving, it will naturally have a higher quality. If there is a core product, active feeding can be applied. No matter whether the core is large or small, it can be accurately delivered. Check and remove the floating hairs and oil stains on the needle. We can see that the oil stain on the needle is not obvious. We can take out the needle, spray sewing oil on the needle to clean it, and then wipe it to the effect of moistening but not oil or a little oil. Put back the needle, press down the needle, push it forward, and install the needle correctly. Press the front end of the crochet with a ruler, and gradually push forward the machine tool in the right direction to press the needle of the knitting machine. You can also apply sewing oil to the sponge fabric surface of the pressing bar. If the sponge of the pressing strip is aging, replace it with a new one. Jiangsu xiangdao Precision Machinery Co., Ltd. is an industrial enterprise focusing on the R & D, manufacturing, sales and service of high-speed knitting machine series equipment and surrounding supporting equipment. The company is located in Shanghai, the international capital, and has Jiangsu Dongtai high-speed knitting machine production base. The company covers a total area of 30000 square meters, and the existing construction area is 15000 square meters. There are two phases of planning The construction area is 10000 square meters. Xiangdao company is one of the manufacturers with large production scale, professional production equipment, strong technology and productivity. The company is an entity manufacturer with high self-supporting ability of spare parts, and is a manufacturer that comprehensively masters the independent production process of all core parts of high-speed knitting machine, so as to ensure long service life. |
| 【Refresh】【Favorites】【Print】 【Close】 |
| Previous:Analysis of technical characteristics of rope knitting machine Next:Advantages and model introduction of high speed knitting machine |
Welcome to Jiangsu xiangdao Precision Machinery Co., Ltd.
