| Outstanding equipment advantages of high speed steel wire knitting machine |
| Hits：1299 AddTime：2020/7/16 10:49:08 |
| The steel wire braiding machine is a special mechanical equipment for rubber hose. The steel wire braiding hose is composed of liquid resistant synthetic rubber inner rubber layer, middle rubber layer, I or III layer steel wire braiding reinforcing layer, and synthetic rubber outer rubber layer with excellent weather resistance. Generally speaking, the auxiliary machine of high-speed knitting machine can not be woven alone. The length of the auxiliary machine tool is equal to that of the main machine tool, and the number of tongue needles is also equal. The difference is that there is a needle bed moving device at the lower left end of the auxiliary machine needle bed. The rotary handle is used to adjust the relative position of the main machine needle bed and the auxiliary machine needle bed. The auxiliary machine head must be connected with the main machine head to use. The performance characteristics of high speed steel wire knitting machine produced by our factory are as follows: 1. High quality parts and reasonable mechanism make the machine run more stable and have longer service life. High speed knitting machine. 2. Humanized design, safe and easy operation, direct and convenient maintenance. 3. It is not easy to break the thread or wear the surface of the raw material during knitting. After weaving, it will naturally have higher quality. If there is a core product, automatic feeding can be used. No matter whether the core is large or small, the amount of feeding can be correct. 4. At the outlet point of zouma ingot, a hanging type industrial porcelain eye (alumina) is installed to replace the perforation operation. The reasonable structure of the walking horse spindle makes it easier and faster to replace the bobbin and adjust the elastic force. 5. The automatic yarn breaking and power-off device of this machine is fast and accurate. When the core is used up or broken, the machine will stop running automatically. Therefore, in the case of unattended operation, the machine can be safely operated to increase the output and reduce the cost 6. The motor adopts frequency conversion control, stepless speed change, easy to control speed and overload protection. The equipment has the advantages of smooth and reliable action of the whole automatic control part, good repeatability and low failure rate. In order to improve the production efficiency, the structure and production process of the steel wire braiding machine are generally used to combine the single wire rod by the laminating machine, which is used for knitting. Steel wire reinforced hydraulic rubber hose is mainly used in mine hydraulic support and oil field exploitation. It is suitable for engineering construction, lifting and transportation, metallurgical forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and mechanized and automatic hydraulic systems of various industrial departments to transport petroleum based liquid, water-based liquid and gas with certain pressure and temperature 。 |
| 【Refresh】【Favorites】【Print】 【Close】 |
| Previous:Matters needing attention and making method of knitting machine Next:Working principle of knitting machine |
Welcome to Jiangsu xiangdao Precision Machinery Co., Ltd.
