| How to reduce dust on knitting machine |
| Hits：1353 AddTime：2020/7/20 10:46:51 |
| How to reduce the dust on the knitting machine, now, the level of various fields is getting higher and higher, and many people attach great importance to the anti fouling problem of machine equipment. This is also the case with the conductive belt knitting machine. It is very important to pay attention to the cleaning of the inner wall of the spindle seat and the surface layer of the spindle. The adhesion and entry of all floating dust, chemical fiber or dirt will aggravate the damage of the spindle and reduce the service life 1. It is forbidden to scatter smoke and dust compounds around the spindle, such as absorbing spilled oil and splashing oil with light calcium powder. 2. Before pulling out the spindle rod plate assembly of the ribbon loom and inserting the spindle seat again, it is necessary to wipe a part of the lower cone of the spindle with a velvet free cloth to avoid bringing chemical fibers, flying flowers, silk returning and dirt. 3. When the spindle rod disc joint is not inserted, use the cleaning plastic film to cover part of the spindle bearing hole to avoid dust, flying flowers and dirt falling into the inner wall of the spindle seat when the spindle rod disc joint is not inserted. 4. The "three concentric" work of spindle, steel ring and yarn guide hook should be done carefully and carefully. The spindle of the conductive belt knitting machine is installed in the Dragon rib hole, which is vertical in radial direction and reliable in positioning. In addition, it is stipulated that the spindle rotation middle line, steel ring management and yarn guide hook management should be concentric, also known as "three concentric" (if equipped with air ring, it is "four concentric"). It is important to stabilize the supporting force of cotton yarn, all normal balloon shape, stabilize spindle vibration, reduce breakage, reduce hairiness, and improve yarn quality. If one of the spindle, steel ring and yarn guide hook is not concentric, the spindle and air ring will appear, the supporting force of cotton textile is uneven, the head weight, spindle vibration will be aggravated, the hairiness will be increased significantly, and the yarn quality will be reduced. It is not difficult to see that the antifouling work of the conductive belt braider is conducive to increasing the service life of the knitting machine. Therefore, we must do a good job in cleaning the inner wall of the knitting machine spindle seat and the surface layer of the spindle. |
| 【Refresh】【Favorites】【Print】 【Close】 |
| Previous:How to maintain the bobbins of parts and components of the network management knitting machine used Next:Matters needing attention and making method of knitting machine |
Welcome to Jiangsu xiangdao Precision Machinery Co., Ltd.
