| How to maintain the bobbins of parts and components of the network management knitting machine used |
| Hits：1504 AddTime：2020/7/22 10:49:44 |
| Network management knitting machine has been used for a long time. How should the bobbins be maintained? The key technology of network management knitting machine is the production assembly line with higher precision. The soft starter is used to control, which further improves the speed ratio. In addition, it also improves the size of the bobbin and increases the one-time application time of the bobbin. The spindle is driven by the spindle belt. The spinning frame of network management knitting machine is made of cotton and rubber. The cotton spindle belt of network management knitting machine has large extension and short application cycle. The vulcanized rubber spindle belt transmission system of network management knitting machine is stable, low vibration, low noise, environmental protection and energy saving, long service life and high price. It is a development trend that vulcanized rubber ingot belt replaces cotton spinning one. This marketing promotion is necessary. Therefore, the quality of bobbins is very important for the application of spindles. In order to select and use high-quality raw materials (such as ABS, PC, PP), the network management knitting machine should enhance the regular maintenance of the re used bobbins, and resolutely and immediately remove the deformed and damaged poor bobbins. If the yarn tube with poor quality or deformation damage is applied, the consideration of spindle irregularity will be increased, the load of spindle rolling bearing will be increased, and the service life of spindle will be reduced. The spherical surface of the tube and spindle of the three-dimensional knitting machine should be close and even, and the sealing surface should not be less than 85%, so as to ensure the reliable, simultaneous and stable operation of the yarn tube and spindle. Generally, the bobbins need to be maintained for half a year 1. Clearing: remove the back silk, flying flowers and dust, and eliminate the accumulated flowers in the "eye of heaven". 2. Bobbin setting: use the standard spindle to cover the bobbin and check the height (± 1.0mm) bottom hole (0.05-0.15mm). 3. Test tube: when spindle speed is 18000 rpm, it is better to estimate or feel the vibration amplitude at the upper end of the bobbin ≤ 0.15mm, and the middle and lower part ≤ 0.25mm (180-190mm bobbins). In addition, the tube with deformation, bending, rough surface and scratch can be removed. Xiangdao company is one of the manufacturers with large production scale, professional production equipment, strong technology and productivity. The company is an entity manufacturer with high self-supporting ability of spare parts, and is a manufacturer that comprehensively masters the independent production process of all core parts of high-speed knitting machine, so as to ensure long service life. |
| 【Refresh】【Favorites】【Print】 【Close】 |
| Previous:Structure principle of high speed needle through knitting machine Next:How to reduce dust on knitting machine |
Welcome to Jiangsu xiangdao Precision Machinery Co., Ltd.
